- Shipping Company Estimated Delivery Time Shipping Cost
하이라이트
- The Mini POWER HUB has been engineered to provide the highest possible performance and reliability in a 36*36mm &
- 4 layers PCB. The HUB distributes power from a battery pack to 4 ESCs, as well as providing synchronised & regulated
- DC outputs for powering cameras, servos, video transmitters, LEDs, etc. Batteries may range from 3S to 6S LiPo.
- The HUB also features convenient solder bridge of various voltage for camera & video TX.
- 2온스 구리 및 4층 PCB.
- ESC & Battery solder tabs in pairs.
- Solder Bridges of various voltage for Camera & VTX.
- 5V & 12V Output LED indicators & Short circuit tolerant.
- 2온스 구리 및 4층 PCB.
스펙
일반 | |
---|---|
타입 | 배전반 |
일반 사양 | Input voltage range (2S-6S operation): 7.2 - 26VDC 조정된 5V 및 12V 출력 LED 전원 표시기(5V 및 12V 출력) 4개의 ESC 출력 |
ESC 출력 | 연속 전류: 출력당 20A 피크 전류(10초/분): 출력당 30A |
BEC 5V outputr |
RC 수신기, 비행 컨트롤러, OSD 및 서보용으로 설계되었습니다. 전압: 5.0 +/- 0.1VDC |
BEC 12V 출력 |
배터리는 4S~6S LiPo여야 합니다. |
CAM 및 VTX 전압 브리지 | 3S operation. choose “VCC” for 12V camera & 12V VTX, VCC=Battery Voltage. 4~6S operation, choose “12” for 12V camera & 12V VTX 3~6S operation, choose “5” for 5V camera Video pass through from the “CAM” pad to the “VTX” pad |
지원 | FPV 멀티콥터 |
패키지 내용물 | |
1 x Matek Mini Power Distribution Board |
고객의 사진
고객 비디오
고객 리뷰
5 스타 | 0 | |
4 스타 | 0 | |
3 스타 | 0 | |
2 스타 | 0 | |
1 스타 | 0 |
- 전체 (0)
- 이미지 (0)
- 비디오 (0)