Geyiren A1 2.0 Inch GPS HUD Car Display Car Head-up Screen Universal With Overspeed Alarm Compass Altitude - Black

주의 사항

Installation of HUD:

For HUD:

Place HUD on the proper position of wind instrument panel, then plug car charger into the cigarette lighter inside, and connect HUD with the USB interface.

In the instant energized, the LED of the host will be fully lit, and then give out a "tick", the host back to sleeping mode, while the satellite signal icon starts blinking. Host automatically search the satellite signal status, after a few seconds, the host will search one satellite signal, the clock will be displayed in the host window. Upon receipt of a successful satellite positioning, satellite icon lights off, while the satellite signal strength indicator signal lights size.

For reflection film:

Please stick the reflection film on the windscreen. Please note: Do not use the reflective film before checking the

HUD host installation location, to avoid wasting of reflection film.

하이라이트

새롭고 고품질

Compatible with all cars & trucks in the world

Easy Setup--Plug & Play- Power through Vehicle Cigarette Outlet Jack, No professional installation is required

Full Display information: Vehicle speed, real-time, over speed alarm, compass, altitude, auto sleeping mode(Above functions are projected on the windshield to remind driver to be safe)

With smart display function: After vehicle stop for 10s, HUD automatically switch to satellite time status, and when vehicle start, HUD automatically switch to the vehicle speed state.

Over Speed Warning Setting -- Alarm Mute Function. Auto Adjust Brightness, Via Light Sensor & Control circuit in HUD unit, Good for day-time & night-time driving

The GPS HUD uses GPS to determine the true speed of the vehicle. You can fine-tune or adjust speed to your personal preference above the Vehicle Speedometer

스펙